Below you will find the specification of each of our Mats:

Product Data Sheet: 450 Volt Protection Electrical Matting

Product: Electrical Safety Matting - 450 volt working

General Description: Natural rubber based electrical matting 6.5mm thick with continuous 2mm high ribbed pattern and providing safe working with 450 volt equipment.

Material Properties:

1 Property measured after ageing for 10 days at 70o in air oven.
THE INFORMATION CONTAINED IN THIS LEAFLET IS BASED UPON TECHNICAL DATA WHICH WE BELIEVE TO BE RELIABLE. THE FIGURES QUOTED ARE AVERAGE VALUES GIVEN IN GOOD FAITH AND WHILST ALL EFFORTS ARE MADE TO ENSURE CONSISTENCY. VARIATIONS MAY OCCUR.

Product Data Sheet: 650 Volt Protection Electrical Matting

Product: Electrical Safety Matting - 650volt working [conforms to BS921]

General Description: Natural rubber based electrical matting 8.5mm min thickness with continuous 2mm high ribbed pattern and providing safe working with 650 volt equipment.

Material Properties:

1 Property measured after ageing for 10 days at 70o in air oven.
2 Compression set assessed using constant load method described in BS 921.
THE INFORMATION CONTAINED IN THIS LEAFLET IS BASED UPON TECHNICAL DATA WHICH WE BELIEVE TO BE RELIABLE. THE FIGURES QUOTED ARE AVERAGE VALUES GIVEN IN GOOD FAITH AND WHILST ALL EFFORTS ARE MADE TO ENSURE CONSISTENCY. VARIATIONS MAY OCCUR.